Self Defense Archives - Page 2 of 2

Installing the APEX Forward Set Sear (FSS) Trigger Kit with no prior gunsmithing experience

Posted onFebruary 16, 2015November 15, 20151 Comment

Disclaimer: This is my experience in the installation of the trigger kit. It worked well for me, but there is always a risk in modifying your own gun. Bring it to a gunsmith if you just want a nice trigger. If you enjoy understanding more about you gun, develop skills to diagnose and work on it, this is actually a good progress to go through yourself.

Installing APEX FSS.

Installing APEX FSS as a beginner?

So if you are wondering if it is possible to install the Apex Forward Set Sear (FSS) Trigger Kit without any prior gunsmithing experience, I’m going to say yes. If you can be careful, understand instruction, decent with tools (e.g., using a punch, vice), then it should go relatively smooth. Prior to installing the trigger kit, I have zero experience in gunsmithing. The most I’ve done with my gun was simple cleaning and some stippling of the back strap. I have never even detail stripped my gun before thinking about installing the FSS trigger kit into my full size M&P9.

My goal to not fear being on the ground – Exploring Brazilian Jiu Jitsu

Posted onFebruary 7, 2015November 15, 20153 Comments

It is true that we cannot always avoid all dangerous situation. However, we can stack the odds more in our favor as much as possible. I take that approach to self-defense (e.g., Krav Maga, conceal carrying). The likelihood of ever needing it is low, but do I want to have the tools and ability when the need ever arises? Hell yes.

The likelihood of me getting into a ground fight is quite low since I avoid getting into any fights. However, if it happens, would I want to have been training to be comfortable on the ground? Would I want to have a toolbox ready to solve the situation? Hell yes.

Personal Protective Equipment (PPE) for Beginner Handgun Class?

Posted onFebruary 1, 2015November 15, 2015Leave a comment

In the Haley Strategic D5 Handgun class, Personal Protective Equipment (PPE) were optional but recommended. The list of PPE were as follow: “Gloves, knee pads, elbow pads, helmet, body armor optional but recommended“. So since it was optional, I wasn’t entirely sure what I should bring from that list, if any at all.

It is a common mistake among novices of any kind to over invest into too many gears they don’t really need at their level. We read a blog about the top 10 essentials for activity X, or a review of best-whatever for activity Y. This is why I appreciate posts that target beginners and let them know what they could take a pass on until things get more serious.

Being a researcher, it is my inclination to read every blog and watch every videos about what I’m currently interested in. And suffice to say, I –almost– fell into the trap of buying a lot of things I don’t need. I stopped myself. There is no way I need body armor or helmet for a basic handgun course…scratched those two. (I understand active military/LE might chose to train in all their gear. That makes sense to me. But for a civilian, especially a beginner, simple is probably best.)

The question was, do I need gloves and knee/elbow pads?

I ended up getting a pair of SKD PIG gloves (black) and using a pair of old boxing gloves as my makeshift knee pads.

Gloves

PIG Full Dexterity Tactical Alpha Touch Gloves (black, size S)

[Review] IWB Holsters, the HSP INCOG vs. PHLster ACCESS

Posted onJanuary 26, 2015November 15, 20156 Comments

If you search “appendix IWB holsters” on the internet, you will surely encounter the G-Code HSP INCOG and the PHLster ACCESS/Skeleton. I decided to get both, and decide which one I might like better. I picked the ACCESS over the Skeleton because I prefer a shirt guard for my holsters.

* Keep in mind that the comfort of carry is quite subjective, and different body-types would find different holsters more comfortable or not.
* Also, PHLster focuses on making holsters for Glocks and M&Ps. If you have a handgun from another manufacturer, AND live in the Philly area, you could possibly go to their workshop and have a custom holster make for your handgun.
* For a comparison between the INCOG and the INCOG Eclipse (mod version), read this post.

Left: HSP INCOG (half guard, 1 belt-clip only); Right: PHLster ACCESS + ITW Snap hook for keys.

First time stippling – M&P backstrap

Posted onJanuary 1, 2015November 15, 20153 Comments

I wanted to make my full-size M&P 9 more “grippy”. Previously, I’ve used grip tape to achieve a more grippy effect. They work fine on flatter surfaces, but the more contour part of the gun is difficult to to make the tape stay in place. A bit of googling led me to the idea of stippling the polymer frame of the gun.

In short, stippling is using hot iron to melt patterns onto the polymer frame of the gun to give it a rougher surface, which increases friction, thus creating a more grippy feel. Stippling the whole frame of the gun is time consuming and irreversible. Since I had no experience in stippling, I was hesitant on making irreversible changes to my gun. The good thing is, the M&P 9 has a removable backstrap, which also happens to be the part of frame that I wanted the most improvement on in terms of adding more grip -over grip tape-.

A cheap investment of $6 gets me an extra backstrap that I can stipple without the fear of irreversible mistakes (I can always get another backstrap and do it again!)

Scale pattern on the backstrap done using soldering iron tip

Modifying HSP INCOG Holster Mag Caddy

Posted onDecember 20, 2014November 15, 20153 Comments

Spare magazine significantly higher than the end of the slide.

The INCOG mag caddy is a good addition to the INCOG holster for carrying an extra magazine right next to the holster. It essentially fills the “gap” that is created between the pant and your waist beside the holster (see image below).

Gap on the left of the holster between the pants and the body. Perfect spot for a an extra mag.

Since the mag caddy fits between a gap that already existed, it didn’t increase any discomfort on the waist band. However, the height of the magazine riding in the mag caddy is significantly higher than the end of the slide, which digs into your gut when sitting down (see top image).

Solution: Move the caddy down one slot. However, another comfort problem occurred when moving the caddy down. The end of the mag caddy sticks out about half a centimeter and digs into my thigh.

I figure since I really like the height of the magazine with the mag caddy in its 1-lower position. The end of the mag caddy just has to go. Out comes the dremel.

[Review/AAR] Consolidated Training Group – Combative Vehicle and Force-on-Force

Posted onDecember 15, 2014November 15, 20152 Comments

Force-on-Force combative simunition class held by CTG

This past Saturday, I got to participate in a combative vehicle and force-on-force simunition class hosted by the Consolidated Training Group (CTG), a DFW based training group in defensive carry utilizing both live-fire training and force-on-force scenarios using Simunition FX man-marking ammo.

Handguns and rifles converted to shoot Simunition FX

Overview

The day lasted from 9am-5pm, with a 50 minute lunch break. Live-fire in the morning and scenarios using fx rounds in the afternoon. Since it is a ‘vehicle’ class, both the live-fire in the morning and scenarios in the afternoon revolves around the use of firearm in AND around a vehicle (e.g., use of vehicle as cover/concealment).

[Review/AAR] Haley Strategic Partner – D5 Handgun Course from a beginner’s point of view

Posted onDecember 13, 2014November 15, 20155 Comments

Note: This is my experience of the HSP D5 Handgun course as an individual who has only began shooting a handgun for ~3 months.

If only one thing:

If there is only one thing I could stress to those who are potentially interested in this course, it will be Haley3 “don’t be intimidated”. Don’t be intimidated by your own lack of experience. Or, don’t be intimidated how much better the other students might be. I have only been shooting for 3 months by the time I attended the course. And at no point did the instructors or other students made it uncomfortable or intimidating for the less experienced in the class. If anything, everyone was ultra-encouraging and very willing to share their knowledge and experiences.

There are other sources on the internet where they would go through what happens in the course day-by-day, so I won’t go over that. (it will be listed at the end of this post)

Exploring concealed carry

Posted onDecember 12, 2014November 15, 2015Leave a comment

in a cast for 3 months

After I broke my dominant hand earlier this year, I began to strongly consider conceal carrying. I wanted to stack the odds in my favor as much as possible if I’m ever in physical danger.

There are a lot to consider before just going out to buy a gun, stick it in a cheap holster and start carrying. There are pros and cons to conceal carrying, and I’m not sure it is for me. So, I’m exploring.

I’m not going to argue on 2nd amendment and who should be allowed to carry. I am only setting boundaries for myself here. I will do the following to help myself make an informed decision:

Obtain quality training in marksmanship and defensive tactics,
Research all the legal and personal consequences
Try this out with proper gear for an extended period of time.

I will cover my exploration in these 3 parts, training, legal/personal consequences consideration, and trying out.